How to Make Die-Cut Style Print Then Cut Stickers from AI Art
To make die-cut style stickers at home from AI art, remove the backgrounds, add an even white border, export the PNGs, upload them to Cricut Design Space as Print Then Cut images, print on inkjet sticker paper, and let the machine cut around each border. Test one sheet before you run a full batch.
Clipart Prep Studio's Stickers tool (beta) does the cut-out and the border for a whole batch. It does not cut anything, and it does not make a cut file. Design Space or your cutter does the cutting. Here is the whole workflow, and what to do if you work in Canva instead.
What you need
- A Cricut that can do Print Then Cut. Cricut's blog lists the Joy Xtra, the Explore range, the Maker range and Venture, and says the original Cricut Joy cannot. Check your model on Cricut's site.
- A colour inkjet printer. Cricut warns that a laser printer may damage the materials or the printer.
- Printable sticker paper, printable vinyl, or one of Cricut's waterproof printable sticker sets. Cricut describes sticker paper as the easiest to peel.
- Your AI images. Simple subjects with clean outlines work best. See fussy-cut stickers from AI images and prepping clipart for stickers.
Step 1: Remove the backgrounds and add the border
- Open the Studio and choose Stickers (beta). Add your images. It takes PNG, JPG or WebP, up to 100 at a time.
- Leave Remove background ticked. It uses 1 image of your allowance for each picture. If your files are already transparent PNGs, untick it and skip that. Your first 5 images are free, no card.
- Pick the border. White is the classic die-cut look, and Standard (0.1 in) is a good starting point. Border widths in pixels helps you choose.
- Set the sticker size, which is the longest side including the border. Smaller stickers need fewer pixels, and the tool warns you if the art is too small for the size.
- Download single stickers as a ZIP of 300 DPI PNGs.
If a sticker is made of separate pieces, getting one outline around them explains how the outline joins them.
Step 2: Choose die cut or kiss cut
A die cut goes through the sticker and its backing. A kiss cut goes through the sticker only and leaves the backing whole, so stickers stay on the sheet. Die-cut vs kiss-cut stickers explains which to choose.
In Design Space, Cricut's blog says its Sticker tool lets you choose either, with an optional easy-peel edge for die cuts, and that the Sticker tool needs Cricut Access. It also says you can make stickers in the free version of Design Space by making outlines with the Offset tool, but that route only gives kiss-cut stickers. Menu names change, so follow Cricut's current help for the exact buttons.
Step 3: Upload to Design Space
- In Design Space, click Upload, then Upload Image, and choose a sticker PNG.
- Tell Design Space how complex the image is, then continue.
- On the clean-up screen you have Select and Erase, Erase and Crop tools for removing background. A PNG that is already transparent may need little work here, but look closely.
- Use Preview to check the cut lines before you go on.
- Save the image as Print Then Cut, not plain Cut. Cricut says Print Then Cut keeps the full image with its internal colours, while Cut saves only the outer silhouette.
- Add the image from your uploads to the canvas.
Cricut updates these screens. Its newer help articles may use different wording for the Print Then Cut option, so if a button does not match, follow Cricut's current help article on uploading images.
Step 4: Size, arrange and flatten
Set each sticker to its final size and arrange them inside the Print Then Cut area. That area is smaller than the paper, so see the Print Then Cut size limit before you plan a full page. If you have layered pieces, Cricut says to flatten them into one printable layer before you click Make It.
Step 5: Print
- Check the Print Then Cut page size under Settings, then Load Type.
- After the mat preview, choose Send to Printer. Bleed is on by default and Cricut recommends keeping it.
- Tick the system dialogue so you can set the material and the print quality. Leave fit onto page unticked, so your sticker sizes do not change.
- Finish the whole job in one Design Space session, in the same browser on the same computer. Cricut says switching, or printing a PDF outside Design Space, can give wrong-sized sensor marks.
Step 6: Cut, and check the cut
Place the printed sheet in the top left corner of the mat, straight and flat. Calibrate your machine for Print Then Cut if you have not, and cut one test sheet before you commit a whole batch.
| If you see | Try |
|---|---|
| Cuts landing off the border | Run the Print Then Cut calibration again, printing the calibration sheet in black and white at actual size |
| Machine cannot read the marks | Keep direct light off the machine, and reprint if the marks are smeared or faded |
| Gaps cut out of the design | Flatten a filled shape behind the image, as Cricut suggests |
| Soft, blurry stickers | See resolution and blur |
What about Canva?
Canva is a design tool, so it can lay out and print a design, but it does not cut at home. Canva's help centre documents a Stroke style option that puts a border on images and other elements, with a thickness and colour you choose. We could not confirm from Canva's pages that this follows the outline of a cut-out, so test it before relying on it. Canva also has its own printed die-cut sticker service, which cuts to fit your design.
For a home cutter, a safer route is to make the bordered PNG first, then place it in Canva only if you want to lay out a sheet.
Stickers is a beta tool. It makes the outlined sticker image and the Letter or A4 sheet. It does not add registration marks, bleed or a cut line. As ever, check you have the right to sell or use any artwork before you do.
Common questions
- How do I make die-cut stickers at home?
- Remove the background from your art, add an even white border, print the stickers on sticker paper from an inkjet printer, and cut around the border with a cutting machine such as a Cricut using Print Then Cut. Test one sheet first.
- How do I make die-cut stickers in Canva?
- Canva can design and lay out the sticker, and its help centre documents a stroke border for images and elements. Canva does not cut at home, so you still need a cutting machine, or Canva's own printed sticker service.
- Can Canva do die-cut stickers?
- Canva has a printed die-cut sticker service that cuts stickers to fit your design. For home cutting, use Canva for the design and a machine for the cut.
- How do I make stickers with a white border?
- Cut the art out from its background, then add an even outline around it in white. The Stickers tool (beta) does that for a whole batch with a width you choose. Cricut's own Sticker tool also has an optional border.
- Do I need Cricut Access to make stickers?
- Cricut's blog says the Sticker tool needs Cricut Access. The free version of Design Space can still make stickers with the Offset tool, but only as kiss-cut stickers.
- Can I use a laser printer for Print Then Cut stickers?
- Cricut says to use an inkjet printer, and warns that a laser printer may damage the materials or the printer.