How Thick Should a Sticker Border Be? Border and Sticker Sizes in Pixels at 300 DPI
Two decisions shape how a sticker looks: how thick the border is and how big the sticker is. Both are easy to get wrong if you only think in inches, because the file lives in pixels.
Here are the border widths and sticker sizes in inches, millimetres and pixels at 300 DPI, plus how big your source image needs to be so the sticker prints sharp.
The short answer
For most stickers, a border of about 0.1 inch (around 2.5 mm) looks balanced: thin enough to feel neat and thick enough to read as a border. Go a little thinner, around 0.06 inch, for a light look. Go thicker, around 0.15 inch, for small stickers or busy designs. If you print through a service, check their own template too, because requirements can differ.
Border widths in pixels
| Setting | Inches | Millimetres | Pixels at 300 DPI |
|---|---|---|---|
| Thin | 0.06 | 1.5 | 18 px |
| Standard | 0.10 | 2.5 | 30 px |
| Thick | 0.15 | 3.8 | 45 px |
| Widest (slider) | 0.30 | 7.6 | 90 px |
Sticker sizes in pixels
| Longest side | Millimetres | Pixels at 300 DPI |
|---|---|---|
| 1 in | 25.4 | 300 px |
| 1.5 in | 38.1 | 450 px |
| 2 in | 50.8 | 600 px |
| 2.5 in | 63.5 | 750 px |
| 3 in | 76.2 | 900 px |
| 4 in | 101.6 | 1200 px |
In the Stickers tool, the size you pick is the longest side including the border. So the art itself is smaller than the sticker by one border width on each side. A 3 inch sticker with a Standard border has 2.8 inches of art.
How big does the source image need to be?
The Stickers tool shows a warning when the art would print at less than about 200 pixels per inch at the size you chose. For the full 300 DPI, aim a little higher. Here is what that means in pixels on the long side of the cut-out art.
| Sticker size | Border | Art size | To avoid the warning | For full 300 DPI |
|---|---|---|---|---|
| 1 in | Thin (0.06 in) | 0.88 in | 176 px | 264 px |
| 2 in | Standard (0.1 in) | 1.8 in | 360 px | 540 px |
| 3 in | Standard (0.1 in) | 2.8 in | 560 px | 840 px |
| 3 in | Thick (0.15 in) | 2.7 in | 540 px | 810 px |
| 4 in | Standard (0.1 in) | 3.8 in | 760 px | 1140 px |
These are the pixels of the art after the background is removed and trimmed, not of the original picture. If you want to check a file, the free DPI checker and 300 DPI calculator can help.
If your image is too small
- Choose a smaller sticker size, which needs fewer pixels.
- Run the image through the Clipart tab with Upscale ticked, then drop the result into the Stickers tab with Remove background unticked.
- Start from a larger image. The Stickers tool does not upscale. Upscaling clipart for print explains how upscaling works.
Border, bleed and cut line are different things
A border is drawn as part of the artwork. Bleed is extra artwork past the cut line that print services ask for, so a slightly off cut never shows a white edge. A cut line is the path a machine follows. The Stickers tool makes the border. It does not add bleed or a cut line, so if a print service asks for either, follow their template. Bleed and safe area explains the difference.
Small tips that help
- Check small stickers on the Dark preview, where any rough edge shows up.
- Keep very thin points out of the design where you can, because they are hard to cut and easy to tear.
- Make digital stickers bigger than you think buyers need, because they can scale down but not up without losing sharpness.
Stickers is in beta, so sizes and options may change as it is polished. The pixel maths here does not: pixels equal inches multiplied by 300 at 300 DPI.
Common questions
- What is the standard sticker border width?
- About 0.1 inch (roughly 2.5 mm) is a common standard for a white border, with thinner and thicker options depending on the look and the size of the sticker. The Stickers tool starts at Standard, which is 0.1 inch.
- How many pixels is a 0.1 inch border at 300 DPI?
- 30 pixels. The maths is inches multiplied by 300, so 0.06 inch is 18 pixels and 0.15 inch is 45 pixels.
- What size should digital stickers be?
- Make them larger than you think buyers need, because they can scale down but not up without losing sharpness. At 300 DPI, a 4 inch sticker is 1200 pixels on its longest side.
- Does the border count towards the sticker size?
- In the Stickers tool, yes. The size you choose is the longest side including the border, so the artwork itself is smaller by one border width on each side.
- Can a sticker have no border?
- Yes. Choose None for the border width. The sticker is still cut out and sized, just without the outline.