How to Add a Die-Cut Style White Border to a Whole Pack of Clipart
A die-cut style sticker has an even white border that follows the shape of the art, like the border on a sticker you peel off a sheet. It makes the art stand out on any background, and it gives a cutting machine a clean edge to follow.
Adding that border to one image is easy. Adding it to a whole pack, with the same width and colour on every piece, is where it gets slow. Here is how to do it in one pass.
What the border actually is
The border is an exact offset of the artwork's outline. Every point on the edge is pushed outward by the same distance, so the width stays even all the way round and the corners come out rounded. It is painted behind the art in the colour you choose, and the result is a transparent PNG with the border included. That means you can put the sticker on any colour and the border goes with it.
The by-hand way, and where it slows down
In a design tool you can fake an outline. In Canva, for example, people usually apply a white glow or outline shadow effect to a cut-out image and push the size up until it looks like a border. The menu names change between versions, so check Canva's own help for the current steps.
It works, but it is one image at a time. You have to match the settings on every piece, and small notches in the shape can leave an uneven edge. For two or three stickers that is fine. For a pack of twenty or fifty it is a long afternoon.
How to add the border to a whole pack
- Open the Studio and choose the Stickers tab. It is marked Beta, which means it is new and still being polished.
- Drop in your images. You can add up to 100 at a time as PNG, JPG or WebP.
- Decide about the background. If your images are already transparent PNGs, untick Remove background and no image allowance is used. If they are not, leave it ticked: each image uses one image, the same as the Clipart tab.
- Pick the border width: Thin (0.06 in), Standard (0.1 in) or Thick (0.15 in), or drag the slider for anything up to 0.3 in. Pick a colour: white, cream, black, or any colour you like.
- Leave Smooth the outline and Fill gaps inside on unless you have a reason to change them. They are explained below.
- Choose the size. It is the longest side of the sticker including the border, from 1 to 4 inches in one click, or any custom size.
- Check the previews, then download. Single stickers come as a ZIP of 300 DPI PNGs, and you can also lay them out on a printable sheet.
What each setting does
| Setting | What it does | When to change it |
|---|---|---|
| Border width | How far the border sits out from the art | Thicker for small stickers or busy art, thinner for a lighter look |
| Border colour | The colour of the border | White is the classic. Cream suits a softer, vintage look. Black or a colour can match a theme |
| Smooth the outline | Rounds off small notches in the border (0.04 in to start) | Raise it if the border looks jagged around fine detail, or set it to off for a very tight outline |
| Fill gaps inside | Fills see-through holes in the middle of a sticker so the border does not show through them | Untick it if you want a hole, such as the centre of a ring, to stay open |
| Size | The sticker's longest side, border included | Match the print size or the size you plan to sell |
Check the edges before you print
Look at the previews on the Grey, Checker and Dark backgrounds. A faint dark or pale line along the edge of the border usually means leftover background pixels from the cut-out. The Stickers tool cleans the white fringe when it removes a background, and it helps to start from a clean cut-out. If you still see a halo, how to remove a white halo from clipart has the fix.
What the Stickers tool does not do
- It does not create a cut-line file for a cutting machine. The border is part of the artwork, and cutting software normally works from the outline.
- It does not upscale. It warns you when an image is small for the size you chose. If you need more resolution, run the image through the Clipart tab first. Sticker sizes in pixels shows how big the source needs to be.
- It does not make art. It preps images you already have.
Stickers is a beta tool. If something looks off, tell us: there is a feedback link at the top of the tab, and every reply helps us polish it.
Where the free tool fits
The free sticker border maker adds the same kind of border to one transparent PNG at a time, and keeps everything in your browser. The Stickers tab in the Studio is the version for whole packs, with background removal, a ZIP of finished stickers and printable sheets.
Common questions
- How do I add a white border to a whole pack of clipart?
- Open the Stickers tab in the Studio, drop in the pack, choose a border width and colour, and the same border is applied to every image. Then download the stickers as a ZIP of PNGs, or lay them out on a printable sheet.
- Can I add a border to a JPG?
- A JPG has no transparent background, so the border would follow the edge of the rectangle. Remove the background first, or start from a transparent PNG. The Stickers tool warns you when an image has no transparency.
- Does adding a border use my image allowance?
- Only the background removal step does, at one image each. The border, sizing and sheet layout are free, and if your images are already transparent you can untick Remove background and use no allowance at all.
- What border width should I choose?
- The Standard border is 0.1 inch, which suits most stickers. Go thinner for a lighter look and thicker for very small stickers. The guide on sticker border width and size has the pixel sizes.
- Does the border work on art made of separate pieces?
- Yes. The outline is drawn around the combined shape, so pieces that sit close together share one border. The guide on getting one outline around separate pieces explains how to control it.
- Is the Stickers tool finished?
- It is in beta. The border, sizing and sheet layout all work, but it is still being polished and some things, such as a cut-line file, are not there.