How to Get One Outline Around a Sticker Made of Separate Pieces
Think of a flower with separate petals and leaves, a name with each letter on its own, or a character with a floating accessory. If every piece gets its own border, you end up with a sticker that is really several tiny stickers, and a cutting machine will treat each one separately.
A single outline around the whole group holds the pieces together as one sticker. Here is how the Stickers tool (beta) draws that outline, and how to control it.
What the Stickers tool does
The border is drawn around the combined shape of all the visible art in one image, not around each piece on its own. If the pieces sit close enough together, their borders grow into each other and become a single outline.
How close is close enough?
As a rule, pieces that are closer than about twice the border width end up inside one outline. With the Standard border of 0.1 inch, pieces less than about 0.2 inch apart are joined. Widen the border, and pieces that are further apart join too.
We tested this with three round pieces: two close together and one further away. With the Standard border, the two close pieces shared one outline and the far one had its own. When we widened the border to 0.25 inch, all three shared a single outline. That is our own test on one simple image, so check the preview on yours.
The two settings that help
- Smooth the outline rounds off small notches and closes narrow gaps in the outline. Raise it a little if the border dips in between pieces.
- Fill gaps inside fills any see-through hole that is completely enclosed by the outline, so no background shows inside the sticker.
How to get one outline
- Add the image in the Stickers tab. Leave Remove background ticked, or use a transparent PNG.
- Start with the Standard border and look at the preview on the Dark background.
- If you can see separate outlines, widen the border a little at a time until they join.
- Raise Smooth the outline for a softer shape if the join looks lumpy.
- Check that Fill gaps inside is ticked if you do not want holes.
- Pick the size and download.
When you do not want them joined
Sometimes you want pieces to stay separate stickers, for example a set of small icons. Add them as separate images instead of one image with several pieces. Pieces that are in the same image are treated as one sticker, and each image you add gets its own outline. Splitting a sheet separates a page of designs into their own files.
Designing pieces that join well
If you are making a design to be one sticker, leave a small, even gap between the pieces, or let them overlap slightly, so the border joins evenly. Pieces that are only just touching look best with a border wide enough to cover the gap with some margin.
Stickers is a beta tool and is still being polished. If an outline does not come out as you expect, use the feedback link at the top of the tab.
Common questions
- How do I make one border around several pieces?
- Keep the pieces in one image and widen the border until the outlines join. The border is drawn around the combined shape, so pieces closer than about twice the border width end up in one outline.
- Why does each piece have its own border?
- The gap between the pieces is wider than about twice the border width. Widen the border a little at a time until they join, or move the pieces closer together in the artwork.
- How can I stop pieces from joining?
- Add them as separate images instead of one image with several pieces. Each image you add is its own sticker with its own outline.
- What does Fill gaps inside do?
- It fills any see-through hole that is completely surrounded by the outline, so no background shows through the middle of the sticker. Untick it if you want a hole, such as the centre of a ring, to stay open.
- Will a cutting machine cut it as one sticker?
- Cutting software usually follows the outer outline, so one joined outline is cut as one shape. Check the result in your own software, because the Stickers tool does not make a cut-line file.