Guide

Cricut Print Then Cut Size Limit and the Best Resolution for Stickers

Print Then Cut images have to be smaller than the paper you print on, because the machine needs room for its registration marks. Cricut's help page (edited 19 August 2026) lists the limit by machine and page size. On Letter paper with an Explore, Maker, Venture or Joy Xtra, the maximum is 9.94 inches tall by 7.44 inches wide. Check yours in Design Space before you design to the edge.

For sharp stickers, aim for 300 pixels per inch at the size you will print. A 3 inch sticker needs about 900 pixels on its longest side. Here is how the limit and the resolution fit together, and what to check when a Print Then Cut sticker comes out soft.

The Print Then Cut size limit

Cricut prints your design on your home printer, then the machine reads black sensor marks printed around it to find where to cut. Those marks need space on the page, so the area you can fill is smaller than the sheet. Cricut's help page, How large can I Print Then Cut, lists the maximum cuttable area for each machine and page size. It also says the cuttable area is not a full rectangle, so a design that uses the full height may not be able to use the full width.

Page and machine (Cricut help page, 19 Aug 2026 edit)Maximum vertical x horizontalPixels at 300 DPI
Letter, Explore / Maker / Venture / Joy Xtra9.94 x 7.44 in2982 x 2232
A4, Explore / Maker / Venture / Joy Xtra10.62 x 7.2 in3186 x 2160
Letter, Joy 29.94 x 3.19 in2982 x 957
A4, Joy 210.62 x 3.07 in3186 x 921

Older posts online quote a smaller maximum of 9.25 x 6.75 inches, which is out of date for these machines. Cricut's page also lists larger pages (Legal, Tabloid, A3) for the Explore, Maker and Venture ranges. Limits can change, so check the current figure for your machine on Cricut's help page or in Design Space, which shows a warning icon when a design is too large.

You also choose the page size in Design Space. Cricut's Print Then Cut 101 post says to open the top-left menu, choose Settings, then Load Type, and pick your size under Print Then Cut Page Size.

What the limit means for sticker sheets

A full Letter sheet is 2550 x 3300 pixels at 300 DPI, which is bigger than the maximum image above, so a sheet laid out edge to edge on a whole Letter page will not fit. The Stickers tool (beta) in Clipart Prep Studio lets you set the sheet margin up to 0.75 inch. At that margin the area inside is 7 x 9.5 inches, which is inside the 7.44 x 9.94 inch figure for most machines. The default 0.25 inch margin leaves 8 inches across, which is too wide. Because Cricut says the cuttable area is not a full rectangle, test it in Design Space and watch for the warning icon.

A simpler way is to download the stickers as single 300 DPI PNGs, upload them to Design Space, and arrange them yourself inside the Print Then Cut area. That way you decide how many fit, and Design Space tells you the real limit for your machine.

Sticker sizes in pixels at 300 DPI

Pixels are inches multiplied by 300 at 300 DPI. The Stickers tool counts the size you pick as the longest side including the border.

Sticker (longest side)MillimetresPixels at 300 DPI
1 in25.4300 px
1.5 in38.1450 px
2 in50.8600 px
2.5 in63.5750 px
3 in76.2900 px
4 in101.61200 px

The art inside the border is a little smaller than these numbers, so border and sticker sizes in pixels shows how big the source image needs to be for each size.

What is the best resolution for Print Then Cut?

300 pixels per inch at the size you will actually print is the usual print target, and it is what the Stickers tool saves at. The Cricut Print Then Cut posts we read do not give a pixels-per-inch figure of their own, so think of 300 as the common print standard rather than a Cricut rule.

The part that catches people is resizing. If a 900 pixel sticker is stretched to 6 inches on the canvas, it is only 150 pixels per inch, and it will look soft. Work it backwards: pixels on the long side divided by inches printed gives your pixels per inch. If the answer is well under 300, make the sticker smaller or start from a bigger image. How many pixels is 300 DPI has a size chart.

Why is my Print Then Cut blurry?

  • Too few pixels for the size. This is the most common cause. Use the maths above, or upscale the art before it goes to print.
  • Print quality is set low. Cricut says to turn on the system dialogue when you send to the printer, then set the material and the print quality there. The dialogue can hide behind Design Space, so look for it.
  • Bleed. Cricut says bleed can make the print look slightly fuzzy, but it is trimmed off when the machine cuts.
  • The printer rescaled the page. Cricut says to leave fit onto page unticked so your image sizes do not change.

Print Then Cut without a white border

People search this for two different reasons, so it helps to know which you mean.

  • A thin sliver of bare paper left around the print after cutting. Cricut's answer is bleed. Design Space adds it by default, Cricut recommends keeping it for the best cut, and you can switch it on or off on the project preview screen.
  • The white sticker border as a design choice, the die-cut look. That is part of the artwork, and you add it before the file ever reaches Design Space. See adding a white border to a whole pack.

Where Clipart Prep Studio fits

The Stickers tool (beta) removes backgrounds, adds an even border in white, cream, black or a colour you pick, sets the sticker size, and downloads single stickers as a ZIP of 300 DPI PNGs or as a Letter or A4 sheet. It shows a warning when the art would print at under about 200 pixels per inch at the size you chose. Your first 5 images are free, no card.

It is not specific to Cricut. It does not add registration marks, bleed or a cut file, and it does not upscale inside Stickers. Design Space handles the cutting. If a picture is too small for the size you want, upscale it in the Clipart tab first, then bring it into Stickers with Remove background unticked.

Next step: how to make Print Then Cut stickers from AI art walks through the whole workflow, from the AI image to the cut.

Common questions

What is the Cricut Print Then Cut size?
On Letter paper, Cricut's help page lists 9.94 inches tall by 7.44 inches wide for the Explore, Maker, Venture and Joy Xtra, and a narrower width for the Joy 2. The limit depends on your machine and page size, so check the current figure for your own machine.
How big can Cricut Print Then Cut be?
Always smaller than the sheet, because registration marks need room around the image. On Letter it is 9.94 x 7.44 inches for most machines, but check Cricut's help page for your machine's current limit.
What is the best resolution for Cricut Print Then Cut?
Cricut's Print Then Cut posts do not state a figure, so use the common print standard of 300 pixels per inch at the size you will print. A 3 inch sticker is about 900 pixels on its longest side.
What if my Cricut Print Then Cut image is too large?
Make it smaller, or split it into separate images and arrange them inside the Print Then Cut area. A whole Letter sheet uploaded as one image is bigger than the usual limit, so upload single stickers instead.
Why is my Cricut Print Then Cut blurry?
Usually the image has too few pixels for the printed size, or the print quality is set low. Divide the image's pixels by the inches printed, aim for about 300, and use the system dialogue to raise the print quality.
Can Cricut Print Then Cut without a border?
If you mean no bare paper edge, Design Space adds bleed by default to help with that, and you can toggle it on the project preview screen. If you mean no white sticker border, simply leave the border off when you make the sticker.

Ready to prep your clipart?

Try it freeFirst 5 images free, no card required.

Keep up to date with everything clipart

New free tools, print tips and clipart resources, straight to your inbox. No spam — just the good stuff, and you can unsubscribe any time.

By signing up you agree to receive occasional emails from Clipart Prep Studio. See our privacy policy.

Cricut Print Then Cut Size Limit and Image Resolution