Guide

Printify and Printful Image Requirements for Clipart: Format, DPI, Size and Transparency

Print on demand services are strict about files in a way marketplaces are not. Upload a PNG with a white box still behind it, or a file that is too small for the print area, and you find out when the product looks wrong, not when you hit upload.

Here is what Printify and Printful say in their own help centres, in plain English, and how to get your clipart ready before it goes near either of them.

What both services say about format and size

Printify's help centre lists JPEG, PNG and SVG as supported print file types. It recommends 300 DPI for JPEG and PNG files, says a lower resolution can be enough for some products, and says products that need very large files, such as blankets or leggings, call for 120 to 150 DPI. The maximum file size is 100 MB for JPEG and PNG, and 20 MB for SVG.

Printful's help centre asks for print files that are at least 150 DPI and sized to match the actual print dimensions. It also stresses that resolution alone is not enough, because a small file stretched over a big print area still prints soft. Both services show product-specific requirements for each print area, so treat the numbers above as a starting point and always check the product page before you design.

PrintifyPrintful
File typesJPEG, PNG, SVGPNG or JPEG for most products (check the product page)
Resolution300 DPI recommended, 120 to 150 DPI for very large productsAt least 150 DPI at the real print size
Where to find exact specsProduct Creator side panel for each print areaFile guidelines on each product page

Why transparency matters on print on demand

Printify recommends removing an image's background unless the background is part of the design, so that only the design itself is printed. Printful says the same thing from the other direction: JPEG files do not support transparency, so a design that should be see-through can show up with a white background, and PNG is the format to use when you need a transparent background or clean edges.

This is where AI clipart catches people out. A lot of it only looks transparent because it is sitting on a white background. On a white mug mockup you will never notice. On a black shirt or a dark tumbler, the white box prints exactly as it was.

How to get a clipart file ready

  1. Check the file is genuinely transparent. Drop it into a transparent PNG checker, which scans the actual pixels rather than trusting how it looks on a white page. Clipart Prep Studio has a free one that runs in your browser, so nothing is uploaded.
  2. If the background is still there, remove it and save as PNG. Do not save back to JPG, which has no transparency at all.
  3. Check the size against the product. A clipart sized for a standard pack may be too small for a large print area, so look at the pixel size the product page asks for.
  4. Upscale if you need to. Both services warn that simply changing the DPI number in a file does not add detail, so upscale the real pixels rather than relabelling them.
  5. Look at the edges on a dark background before you upload. A faint pale rim that is invisible on white can show clearly on a black shirt.

Clipart Prep Studio doesn't convert files to a different colour mode and it doesn't know which print on demand product you are designing for. It prepares the clipart itself: background removed, upscaled and saved as PNG. You still need to check the product page for the exact print area size.

Where Clipart Prep Studio fits

Clipart Prep Studio's Clipart tab removes the background and upscales a whole pack in one batch. It saves transparent results as PNG stamped at 300 DPI. Its Clipart size option targets about 3,600px on the long side, which is 12 inches at 300 DPI, and the Wall art & POD option targets about 4,500px for larger print areas. A Clean up white edges option, off by default, removes the faint pale rim that can show up on dark products when you tick it.

If a result has lost a bit it should have kept, or kept a bit it should have cut, the built-in editor lets you restore or erase before you download. Your first 5 images are free, no card.

Common questions

What file format should I upload to Printify or Printful?
PNG is the safe choice for clipart, because it supports a transparent background. Both services also accept JPEG, but JPEG has no transparency, so a design that should be see-through can show a white background.
What DPI do Printify and Printful want?
Printify recommends 300 DPI for JPEG and PNG files, with 120 to 150 DPI for very large products. Printful asks for at least 150 DPI at the actual print size. The product page shows the exact requirement for each print area.
How big can the file be?
Printify's help centre gives a maximum of 100 MB for JPEG and PNG files and 20 MB for SVG files. Check the current limits in the help centre before you upload very large files.
Why does my design have a white box on a dark product?
The file almost certainly has a white background that only looked transparent on a white page. Remove the background properly, save as PNG, and check it on a dark background before uploading.
Does raising the DPI number in a file make it sharper?
No. Both services point out that relabelling a small image as 300 DPI adds no detail. The only fix is more real pixels, which means upscaling or creating the art larger in the first place.

Ready to prep your clipart?

Try it freeFirst 5 images free, no card required.

Keep up to date with everything clipart

New free tools, print tips and clipart resources, straight to your inbox. No spam — just the good stuff, and you can unsubscribe any time.

By signing up you agree to receive occasional emails from Clipart Prep Studio. See our privacy policy.

Printify and Printful Clipart File Requirements