Guide

How to Prep Clipart for DTF (Direct-to-Film) Printing

Direct-to-film (DTF) printing is popular for custom apparel, and it is fussier about artwork than sublimation is. Soft glows, faint shadows and fuzzy edges that look lovely on screen can print rough, and some designs simply do not suit the process.

Here is what a print on demand provider says about DTF files, and a practical way to prep clipart so it has the best chance of printing clean.

How DTF works, in one paragraph

In DTF, the design is printed onto a transfer film, then coated with a layer of white ink that acts as a binder for adhesive powder. The film is cut out and heat-pressed onto the garment. Because the print is built as a layer on film, the shape and edges of your design file matter a lot.

What the provider's own DTF guide says to avoid

Printful's guide to preparing a DTF file recommends the following, and it is a useful checklist whichever provider you use.

  • Avoid semi-transparent graphics, or elements with lowered opacity, because they don't translate well in direct-to-film printing. Use solid colours instead.
  • Skip soft edges. Designs with soft edges don't work for direct-to-film because the small ink dots that make the effect are too small to adhere to the garment, which most likely gives a rough, blotchy edge.
  • Avoid gradients that fade from solid to transparent.
  • Be careful with small dots and very thin lines, which can peel off over time.
  • Submit PNG or JPEG files at 150 to 300 DPI. A resolution below 150 DPI can lead to blotchy, uneven edges, and changing the DPI number in a low-resolution file does not give a higher-resolution print.

How to prep your clipart

  1. Start with art that has solid, flat colours. Watercolour washes, glows, faint drop shadows and fade-outs are the elements most likely to cause trouble, so choose or regenerate artwork without them.
  2. Remove the background so the file is a real transparent PNG. A background left behind is part of the print.
  3. Upscale to a true 300 DPI at the size you plan to print, rather than relabelling a small file.
  4. Preview the cut-out on the Grid, White and Black backgrounds and zoom in on the edges. Look for leftover specks, a pale rim, or chunks of the artwork that were cut away by mistake.
  5. Fix anything that looks off, then save and check the product page of your provider for its file guidelines before you upload.

Be realistic about edges. Clipart Prep Studio removes the background cleanly, but a cut-out edge from a background remover usually has a slight soft edge of partly transparent pixels, and the app doesn't turn those into hard-edged solid pixels. If a provider asks for strictly solid edges, ask them what they accept, and keep your artwork bold and flat to start with.

Where Clipart Prep Studio fits

In the Clipart tab, Remove background and Upscale can run together across a whole pack. Clean up white edges is off by default. Tick it to remove the faint white halo that can show on dark garments. Keep interior areas solid refills enclosed holes if the remover cut out part of the inside of a design; leave it off for designs that are meant to be see-through, like rings or frames. After the batch finishes, the editor on each result lets you restore parts that were removed by mistake, or erase specks. Your first 5 images are free, no card.

Common questions

What file format does DTF printing need?
Printful's DTF guide says to submit PNG or JPEG files at 150 to 300 DPI. PNG is the one to use when your design needs a transparent background.
Why do semi-transparent elements cause problems in DTF?
Printful's guide says semi-transparent graphics or elements with lowered opacity don't translate well in direct-to-film printing, and recommends solid colours. Soft edges are also listed as a problem, because the tiny ink dots that create them don't have enough surface area to adhere well.
Can I use watercolour clipart for DTF?
It depends on the provider and the design. Watercolour often relies on soft, partly transparent edges and washes, which is exactly what DTF guides warn against. Test one design first, or choose bolder, flatter artwork for DTF.
Is 300 DPI required for DTF?
Printful's guide asks for 150 to 300 DPI and warns that anything under 150 DPI can print blotchy. Aiming for 300 DPI at your actual print size gives you headroom.
Can Clipart Prep Studio make the edges hard and solid?
No. It removes the background, cleans up the white halo and trims and upscales the result, but it doesn't convert soft edge pixels into hard ones. Keep your artwork bold and flat, and follow the file guidelines of your print provider.

Ready to prep your clipart?

Try it freeFirst 5 images free, no card required.

Keep up to date with everything clipart

New free tools, print tips and clipart resources, straight to your inbox. No spam — just the good stuff, and you can unsubscribe any time.

By signing up you agree to receive occasional emails from Clipart Prep Studio. See our privacy policy.

How to Prep Clipart for DTF Printing (Clean PNGs)