Guide

How to Prep AI Line Art for Amazon KDP Coloring Books: 300 DPI, Trim Size and Bleed

A printed coloring book is a different job from a digital download. The images go into a manuscript file, the book is trimmed to size by the printer, and resolution problems that were invisible on screen show up on paper.

Here is what Amazon KDP's own help pages say about images, bleed and transparency, and how to get your AI line art ready before you assemble the book.

What KDP says about image resolution

KDP's help page on formatting images says images should be inserted into your manuscript at a minimum resolution of 300 DPI, at 100% size and flattened to one layer. It classes anything under 200 DPI as low resolution. It also warns that manually changing the DPI value of an image may show a higher number but does not increase quality, because it is not possible to add pixels that are not there.

KDP's advice for working out your DPI is simple division. Its own example: an image 1200 by 1800 pixels printed at 4 by 6 inches is 300 DPI. KDP also says not to enlarge an image after you insert it, because that lowers the resolution. So the time to upscale is before the picture goes into your manuscript.

Bleed, in KDP's words

KDP says that when a book is printed, pages are trimmed to the selected size by cutting 0.125 inches (3.2 mm) from the top, bottom and outside edges. If you want artwork to reach all the way to the edge of the page, it has to extend past the trim line by that amount. KDP also says bleed is only supported for fixed-format files such as print-ready PDFs.

KDP lets you choose whether your interior has bleed or not. Decide that first, because it changes how big each image needs to be, and check KDP's page on when to choose bleed for your interior.

How to prep your art

  1. Choose your trim size first. KDP says 6 by 9 inches is the most common trim size for books in the US, but you have other options. At 300 DPI, a full 6 by 9 inch page is 1800 by 2700 pixels.
  2. Decide whether any image will bleed off the edge. If not, you can keep every picture inside the margins.
  3. Work out the pixel size each image needs: width and height in inches multiplied by 300.
  4. Upscale each image to at least that size before placing it, and keep the proportions the same.
  5. Check each page at full size for broken lines, doubled lines and grey smudges. Regenerate any that are not clean.
  6. Flatten any transparency. KDP notes that transparent areas can print with a slightly different colour from the surrounding area, and advises flattening all layers in the final file.

Clipart Prep Studio prepares image files: it upscales, trims and renames, and removes backgrounds. It doesn't build books, add bleed, set trim sizes, build a manuscript PDF or check a manuscript against KDP's rules. Always check KDP's current help pages before you upload.

Where Clipart Prep Studio fits

For line art that sits on a white page, untick Remove background in the Clipart tab, keep Upscale ticked and pick the size target that gets you enough pixels. Turn off Trim to artwork under Advanced options so each page keeps its canvas, and choose PNG or JPG as the output format. JPG flattens onto a white background. A batch can hold up to 100 images, and a name in the Rename box numbers the files in order, which helps when you drop pages into your manuscript. Your first 5 images are free, no card.

Common questions

What resolution do images need for a KDP paperback?
KDP's help pages say a minimum of 300 DPI, with images at 100% size and flattened to one layer. Anything below 200 DPI is considered low resolution.
What is bleed on KDP?
Pages are trimmed by 0.125 inches (3.2 mm) from the top, bottom and outside edges. For artwork to reach the edge of the page, it has to extend 0.125 inches past the trim line, according to KDP. Bleed is only supported in fixed-format files such as print-ready PDFs.
Can I just change the DPI setting to 300?
No. KDP says manually changing the DPI value may show a higher number but does not improve quality. The image needs real pixels, so upscale it or recreate it larger.
What trim size should a coloring book be?
KDP says 6 by 9 inches is the most common trim size for books in the US, but it offers several other sizes. Choose before you size your images.
Does Clipart Prep Studio make KDP-ready books?
No. It prepares the image files, such as upscaling and renaming. You build the manuscript and PDF in your own tools and check it against KDP's current guidelines.

Ready to prep your clipart?

Try it freeFirst 5 images free, no card required.

Keep up to date with everything clipart

New free tools, print tips and clipart resources, straight to your inbox. No spam — just the good stuff, and you can unsubscribe any time.

By signing up you agree to receive occasional emails from Clipart Prep Studio. See our privacy policy.

Prep AI Line Art for KDP Coloring Books (300 DPI)